IMPORTANT NOTICE FOR YAMAHA TRAILTANK ONLY
UPDATED November 12, 2008
ATTN: CUSTOMERS AND DEALERS
We need to let you know about some recently discovered issues on our Nytro TrailTanks.
For those of you who have purchased our tanks for the MTX NYTRO model, they have a heat exchanger with coolant lines that are conflicting with our tank. We had designed this tank around an RTX and were unaware of this difference until last week. Some of you may have made it work anyway as have some of our dealers. Please contact us for help with any issues regarding this change.
For all 09 Nytro models, there are three issues with the fuel gauge sending unit.
1. The hole spacing in the mountiung plate is slightly tighter and is keeping some guys from getting all the bolts started without enlarge two of the holes.
2. The lip on the mounting plate is about 1/32" deeper which has kept the oring from sealing on some of our tanks. We will send you a thicker oring if you contact us with your address.
3. The float road assembly is positioned lower on the 09 assemblies compared to the 08 assembly we used for our design. This may cause your gauge to read 2 bars and NOT CAUSE THE LOW FUEL LIGHT to come on. This can be fixed by giving your rod a slight bend upward until it reads 1 bar and the light comes on. You can do this by draining your tank below the fuel pump opening, removing the fuel pump, and reaching through that hole to access the float rod.
PLEASE CONTACT US WITH ANY QUESTIONS OR CONCERNS WITH THESE ISSUES. WE ARE RECASTING PART OF OUR MOLD TO RECTIFY ALL THESE ISSUES. THE NEW TANKS WILL BE READY FOR SHIPPING THE FIRST WEEK OF DECEMBER.
WE SINCERELY APOLOGIZE FOR THE INCONVENIENCE AS IT IS OUR GOAL TO PROVIDE YOU WITH A QUALITY PRODUCT ABSENT OF THE SORT OF ISSUES WE ARE NOW EXPERIENCING.
THANK YOU.
